Waxing has a better maintenance effect on the solid wood door in Henan Province, which can prevent water invading the solid wood door, when dust, can add the finish of the solid wood door. However, if the waxing method is improper, there will be whitening, ring marks, discoloration. Therefore, when waxing solid wood doors, we must pay attention to the following:

1. Choose a good weather waxing: high humidity in rainy days, waxing will occur white turbid phenomenon. When the room temperature is below 5 ℃, the solid wood wax will harden. Before waxing, please do use the rag containing chemicals to scrub the solid wood door, which will lead to poor adhesion of the solid wood door wax.

2. Remove the waste dirt on the exterior of the solid wood door: use the vacuum cleaner to remove the waste dust on the exterior of the solid wood door. Wipe the stain on the solid wood door with diluted neutral detergent. Stains that are difficult to remove can be scrubbed with water. In order to prevent detergent accumulating in the groove soaking in the detergent, the dishcloth should be wrung dry as much as possible. Solid wood wax remover will lead to marks bulges on wood doors, which will definitely be used.

3. Wipe with a wrung cloth: wipe with a wrung cloth. The exterior surface of the solid wood door, especially the groove part, should be carefully scrubbed without detergent residue. Such as residual detergent water, will cause the appearance of white, bulging.

4. Abundant dry: the moisture on the exterior surface groove of the solid wood door is completely dry before waxing. According to different seasons, the time required also changes, but it will take more than half a sound. If through abundant dry, solid wood wax will be tightly attached to the exterior surface of the solid wood door, affecting the beautiful, white phenomenon.

5. Waxing method: shake the container with solid wood wax mix it well. Before waxing all the solid wood doors in the room, we should try some of them in the corner other inconspicuous places admit whether they are abnormal. In order to avoid the solid wood wax polluting the skirting furniture of the wall, it is necessary to hide the above parts with adhesive tape. Use a clean cloth to fully dip in solid wood wax, so as to drip. Do pour the solid wood wax directly on the solid wood door, there will be marks circle marks. According to the direction of the wood grain of the solid wood door, carefully paint, do miss painting uneven thickness. Too little modification will lead to uneven thickness too much modification will lead to poor film making. Sticking to the principle of even thickness is the key to wax production. Do dilute solid wood wax with water. Waxing things can be used for waxing special mop, simple operation, role aspirations.

6. Do touch the solid wood door before it is dry: it usually takes 20 minutes to 1 hour to dry. In case of missing coating, make up coating. For example, the method of twice waxing the second modification should be carried out after the first thorough drying. Every 6 months so to play wax, to long-term adhere to the beautiful solid wood doors.