Installation steps of solid wood wall panel:
1. Arrange locate the position of each wall panel to be installed according to the design requirements;
2. Clean the wall surface to be installed bottomed with wall protection plate;
3. Apply dolomite structural adhesive white emulsion on the middle surface of the back of the wall protection board respectively (remember to use styrofoam);
4. Install bottom to top, fix the upper lower edge of each wall panel with straight nails according to the installation position determined in advance;
5. Then fix the top angle line, waistline skirting line with mosquito nail at the top, middle bottom respectively. Special reminder: when installing waistline, please be sure to apply proper amount of dolomite structural adhesive white emulsion on the back of waistline.